Logosol PH360 – Industrial power in a sleek format
A
stable four-head planer/moulder for professional production. This
completely new machine has its place in environments such as woodworking
shops, timber yards, homebuilding facilities and, naturally, in the
construction trade. One and the same machine can mould everything from
fine trim work to timber blocks with outstanding results.
Unique stability The powerful cast iron table is the heart of the machine, guaranteeing vibration-free operation. It is bolted onto a stable steel base with solid foundation support. The bottom cutter, side cutters and integrated feeder tables are set into the cast iron table. The top cutter and feed rollers sit in a separate support that is also integrated into the cast iron table by way of oversized trapezoidal bars.
A machine that changes size according to material If you are planing small materials, such as panels and strips, the top cutter support lays close down to the table. If you want to feed in five-inch housing timber, the top cutter support shifts to a higher position above the table, and the machine changes height both internally and externally. The machine can shift up to 9”(230 mm) in height!
Building around the machine It is often a good idea to try to get started quickly with production when you get your machine home. PH360 essentially requires nothing more than a good chip extractor before you can get started with your first piece of work. You can even mount it on wheels. But this is a machine that is meant to have a system built around it. The feeder tables are at a set height so they are easy to extend and adapt to manage the massive volumes of wood the machine is capable of processing. Having a fixed hose system for chip management also makes for a significant improvement. Keep things organised, clean and straight, and then you'll keep your productivity up
Sufficient capacity Each of the machine’s cutters has its own large motor, sufficient for every imaginable type of processing of every possible type of wood. Feed rate is continuously adjustable up to 98 ft/min(30 meters a minute). A realistic feed rate for one person to handle is around 20 ft/min(6 meters per minute), while two people can handle a speed of approximately 49 ft/min(15 metres a minute) to keep up a smooth work tempo. The machine can run on a 60-amp electrical supply. Keep in mind that power is also drawn by the blower, so you should also have a 40-amp supply for the Chip Extractor. Not much electrical requirement, considering such a large capacity machine.
Perfect results We have taken several measures to make it easier to get perfect results. Among other things, the top cutter has a greater diameter than its predecessor, and it has a double outlet for chip extraction to keep things truly clean and clear and reduce the risk of chip marking. The feeder table has a straight guide that comes in handy when planing flooring, gluing strips, or furniture. A larger and heavier machine is also an automatic advantage when it comes to roughness.
Impressive control panel All the settings you need can be found on the same side of the machine, which means that the machine can be set up close to a wall, thereby saving space. The handles that set height and width have gauges, so you can easily read off measurements down to a fraction. The lever for rapid setting of the straight guide is easily accessible from the feed table, and therefore also close to the control panel. There is a separate start, stop and lamp for each cutter and for the feeder unit.
