The efficiency and the operational reliability of Logosol Laks frame saw make it belong in a class by itself.
Invest in a profitable frame saw Overall, this is a good investment both in the short and the long run. The Logosol Laks frame saw is cheap to install and it has high productivity from the first moment. Due to the sturdy construction and the smooth running, it does not offer many surprises. The Logosol Laks frame saw will work faithfully and keep its value for decades. It always feels safe with well-tried technique.
The logs should be sawn on two sides before they are fed into the Logosol Laks frame saw so that the lumber is edged before it is cut into boards. This gives a controlled process and minimal handling of the lumber. Without ado the cants are turned into sawn products. always feels safe with well-tried technique.
Pleasant on the working site The environment around the sawmill is pleasant. It is neat and tidy. What little sawdust that comes from the thin blades, is transported away by a relatively small sawdust extractor. An additional nozzle vacuums the top side of the cant so that the boards become completely clean after they have been sawn. The frame saw is seldom the bottleneck
The blades are replaced quickly The Logosol Laks frame saw relentlessly works away, without interruption or trouble, hour after hour. In practice, the Logosol Laks frame saw is, despite the low feeding speed, in almost every case the quickest on the working site. The blades are mounted in fixed positions in a comb-shaped holder. This is an excellent system, which makes replacing blades a quick operation and ensures that the blades always come in exactly correct position. The entire procedure takes less than 20 minutes.
Environmentally friendly and economical All Logosol Laks are powered by an 11 kW electric three-phase motor. The model 330 can also manage on 7.5 kW. If you do not have access to electricity, all the models can be run by a 23 hp, environmentally friendly combustion engine. Here we have maybe the world’s highest capacity per used energy mass; around 500 linear metres/litre of fuel or, with electricity, 100 linear metres/kWh. That this is environmentally friendly is obvious. For some people this is just a matter of saving money, but in many places around the world it is a prerequisite.
